The power type and purchase of the circular tube laser cutting machine are determined according to what

Because the power of the laser is a factor proportional to the thickness and density of the cutting material. Then the power type and purchase of the circular tube laser cutting machine are mainly determined by what. Here’s what to do

1, according to different materials to choose the appropriate power of different materials cutting need different power equipment, such as round tube laser cutting machine power 300W is mainly suitable for 0.5mm below the metal sheet cutting, choose according to the cutting material and the corresponding cutting power:

2, common cutting materials (round pipe, metal, rectangular pipe, oval pipe, etc.), profiles (channel steel, Angle steel, etc.) some special-shaped pipe cutting. Compared with the traditional laser pipe cutting machine has many advantages. Suitable for high-efficiency processing of large quantities, high cutting precision and fast speed, no need for secondary processing, saving materials. CNC operating platform and professional cutting control software make the operation easier and more flexible.

3, in addition, the performance of the laser tube cutting machine is not only determined by the power, but also the influence of process parameters, cutting material characteristics, quality, gas purity, control system, beam quality and other factors. If the laser power is set high, the cutting gap will be large, affecting the cutting effect; If the power is set too small, it will lead to uneven cutting section or continuous cutting.

Of course, in order to ensure the good performance and cutting quality of the round tube laser cutting machine, the round tube laser cutting machine has a variety of powers, and the equipment with different powers is suitable for different material thicknesses. You can choose the right one according to your needs. When cutting, it is necessary to choose the appropriate power and gas, and take a reasonable cutting speed to ensure the cutting quality and improve production efficiency. This needs to be determined according to the actual cutting material and its characteristics.